The Curved Heel Timber Gate

Suitable for the larger entrance, this popular gate with its smooth curves, comes with a all round planed finish and stainless steel bolts.

Can be made in various sizes from 0.9m to 4.5m wide

Available Sizes and prices: All prices DO NOT include VAT

 


The PAR Diamond Brace Timber Gate

Our planed all around diamond braced gate can be hung from either end. It is very popular for driveway entrances, equestrian / sand schools and agriculture alike.

It can be made up to 4.5m wide with a standard height of 1.2m


Planed Devon Gate

Our planed Devon gate can be made upto 4.5m and is either left or right hand hang


The Hillies

These entrance gates offer a smooth double cyrved finish that really does look the part.

They're made using 70mm thick timber with mortice and tenon joints.

They can be made up to 2.4m wide (each gate) and up to 1.8m high P.O.A


The Cranford Entrance Gates

This framed ledge and braced half picketed gate can be meade using either round top or pointed top pickets, it's the ideal gate to either complement picket fencing / panels, or just to finish off your driveway.

Mortice and tenon joints, 70mm stiles and top rails, the pickets are 75 x 25mm with every other picket morticed into the top rail.

Can be made up to 4m wide and up to 1.5m high. P.O.A


The Dunsbeare

The Dunsbeare is a slighty different take on our Cranford design with decreasing size pickets this gate looks best in a pair P.O.A

The Cottage Entrance Gate

The Cottage is a half panel framed ledge and brace gate made from 75mm x 50mm Redwood, the bottom half consisting of tongue and groove jointing , with the top half Morticed in 75 x 25mm

A sturdy, stylish gate!
Can be made up to 2.0m wide x 2.0m high P.O.A

The Dartington

These driveway gates feature a solid TGV clad finish with a smooth curved top that offers total privacy to your entrance.

They're made to a 62mm finish and mortice and tenoned together. The face is clad using 100 x 19mm tongue and groove.

They can be made uo to 2m wide (each gate) and up to 2m high. P.O.A

 


The Dartington (Flat Top)

These driveway gates feature a solid TGV clad finish with a smooth flat top that offers total privacy to your entrance.
They're made to a 62mm finish and mortice and tenoned together. The face is clad using 100 x 19mm tongue and groove.
They can be made uo to 2m wide (each gate) and up to 2m high. P.O.A

The Libberton

The Libberton is the same as the flat top Dartington but with extended horns at the top of the gate for a different look
P.O.A


The Tarka

The Tarka is a very inpressive gate that will enhance any driveway mortice and tenoned frame with TGV cladding to bottom and 70mm x 20mm slats in the top can be made upto 2.4m x 2.0m each gate
P.O.A